李木军

时间:2020-03-07浏览:75

李木军 副教授 硕士生导

电 话:0551-63607547

邮箱:lmn@ustc.edu.cn



个人概况:

李木军,1976年1月生,博士,副教授,硕导。2000年于中国科学技术大学获机械设计制造及其自动化专业学士学位,2007年于中国科学技术大学获精密仪器及机械专业博士学位。2007-2009年在国家同步辐射国家实验室做博士后, 2009年10月加入奥门威尼斯APP-奥门威尼斯人手机版任副教授

主要研究方向:

数字化设计,超精密加工,光学制造,3D打印技术

主要研究兴趣在于多尺度、多材料三维微纳结构的▓设计、应用及其非传统加工技术。结合光刻,超精密加工,3D打印,DMD数字光调控等先进技术,研究和发展了多种以精密成型技术为基础的▓非传统加工方法,包括滚动型微纳米压印技术,光学玻璃元件的▓多尺度精密热压成型,有限元工程计算及工艺过程仿真等。

学习经历:

1995.092000.06 中国科学技术大学 奥门威尼斯APP 学士

2000.092003.06 中国科学技术大学 奥门威尼斯APP 硕士

2004.022007.06 中国科学技术大学 奥门威尼斯APP 博士

工作经历:

2007-2009 同步辐射国家实验室 博士后

2012-2013 美国俄亥俄州立大学 访问学者

2018-2019 美国南加州大学   访问学者

2009-至今 中国科学技术大学  副教授

学术任职:

主要讲授课程:

本科学科群基础课《机械制图及CAD》

研究生专业基础课《工程中的▓有限元方法》

招生信息:

主要论著:

(1)     近五年论文发表情况:

1、YuxuanSun, Wei Tian, Tao Zhang, Peng Chen, Mujun Li*. Strength and Toughness Enhancement in 3d Printing via Bioinspired Tool Path. Materials and Design, Volume 185: 108239  (2020).

2、Tao Zhang, Mujun Li*, Huichun Ye, Cuicui Shi.Ultra-long and high uniform optical needle generated with genetic algorithm based multifocal positions optimization. Optics communications, https://doi.org/10.1016/j.optcom.2019.125178, (2019).

3、Chen Yang, Mujun Li*, Jianping Wang, Huichun Ye, Jinfeng Qiu. Residual layer assisted demolding in roll-to-roll UV imprint lithography. Microelectronic Engineering, Volume 217: 111110  ( 2019).

4、Shengzhou Huang, Mujun Li*, Lei Wang, Yongsheng Su and Yi Liang.Precise fabrication of large-area microstructures by digital oblique scanning lithography strategy and stage self-calibration technique. Applied Physics Express, 12(9): 096501 (2019)

5、Shengzhou Huang, Mujun Li*, Lei Wang, Yongsheng Su and Yi Liang. A self-calibration method with high-accuracy and low-cost for large-area motion stage based on digital grating projection mode. Applied Physics Express, 12(12): 126503 (2019)

6、Tao Zhang, Mujun Li*, Jinfeng Qiu, Cuicui Shi, and Peng Chen, Multiple foci modulation with controllable positions and intensity ratios through decomposed optimization, Opt. Lett. 44, 2354-2357 (2019)

7、Xiaona Huang, Qiliang Wang, Honglun Yang, Shuai Zhong, Dongsheng Jiao, Kaili Zhang, Mujun Li*, Gang Pei*. Theoretical and experimental studies of impacts of heat shields on heat pipe evacuated tube solar collector. Renewable Energy, Volume 138, 2019, Pages 999-1009, https://doi.org/10.1016/j.renene.2019.02.008.

8、Junjie Zhu, Mujun Li*, Jinfeng Qiu, Chao Ji, Jianping Wang, and Huichun Ye. Fabrication of 100% fill-factor aspheric microlens array by dose-modulated lithography and low temperature thermal reflow. Microsystem Technologies, 2018, DOI: 10.1007/s00542-018-4226-2.

9、Jinfeng Qiu, Mujun Li*, Huichun Ye, Chen Yang, Cuicui Shi. Fabrication of high fill factor cylindrical microlens array with isolated thermal reflow. Applied Optics, Vol. 57, Issue 25, pp. 7296-7302 (2018).

10、Jinfeng Qiu, Mujun Li*, Huichun Ye, Junjie Zhu, Chao Ji. Fabrication of high fill-factor microlens array using spatially constrained thermal reflow. Sensors & Actuators: A. Physical, Volume 279, Pages 17–26, 2018 (DOI: 10.1016/j.sna.2018.05.039).

11、Chao JiMujun Li *Jinfeng QiuJunjie ZhuHuichun Ye. Fabrication of seamless roller mold with smooth surface microstructures by rotation lithography and reflow process. Micro & Nano Letters, 2018, DOI: 10.1049/mnl.2018.0155

12、Qiu, Jinfeng; Li, Mujun*; Zhu, Junjie; Ji, Chao. Fabrication of microlens array with well-defined shape by spatially constrained thermal reflow. Journal of Micromechanics and Microengineering, 2018, 28(8): 085015,  DOI:10.1088/1361-6439/aabd1d

13、Huichun Ye, Zhaolou Cao, Mujun Li*. Rapid fabrication of semiellipsoid microlenses using 3D-printing and Roll-to-Roll imprinting processMicrosystem Technologies, Volume 24, Issue 8, pp 34373441, 2018DOI: 10.1007/s00542-018-3737-1

14、Jianping Wang, Mujun Li*, Jinfeng Qiu and Youquan Zhou. Filling Angle and its effect on filling process in roll-to-roll ultraviolet imprint lithography. Journal of Micromechanics and Microengineering, vol. 28, issue 3: 035011,  2018

15、Shengzhou Huang, Mujun Li*, Lianguan Shen, Jinfeng Qiu, Youquan Zhou. Fabrication of high quality aspheric microlens array by dose-modulated lithography and surface thermal reflow. Optics and Laser Technology, Volume 100, 1 March 2018, Pages 298–303.

16、Shengzhou Huang, Mujun Li* , Lianguan Shen, Jinfeng Qiu, Youquan Zhou. A simple method for shape modulation in microlens array fabrication via spin-coating process. Microsystem Technologies, 24(4), 1885-1889. 2018.

17、Zhou Youquan, Li Mujun*, Shen Lianguan, Ye Huichun, Wang Jianping, Huang Shengzhou. Effect of resin accumulation on filling process in roll-to-roll UV imprint lithography[J]. Journal of Vacuum Science & Technology B, 2017, 35(3): 031602 (Cover Story).

18、Huang Shengzhou, Li Mujun*, Shen Lianguan, Qiu Jinfeng, Zhou Youquan. Flexible fabrication of biomimetic compound eye array via two-step thermal reflow of simply pre-modeled hierarchic microstructures[J]. Optics Communications, 2017, 393: 213-218.

19、Huang Shengzhou, Li Mujun*, Shen Lianguan, Qiu Jinfeng, Zhou Youquan. Improved slicing strategy for digital micromirror device-based three-dimensional lithography with a single scan[J]. Micro & Nano Letters, 2017, 12(1): 49-52.

20、Huichun Ye, LianguanShen, Mujun Li*, Likai Li. A microlens array with different focal length fabricated by roll to roll UV lithography. Polymers & Polymer Composites, Vol. 26, No. 2, 2018

21、Yang Hu, Lianguan Shen, Jian Zhou and Mujun Li. Numerical Study of Temperature Distribution Control in Precision Glass Molding Furnace. International Journal of Precision Engineering and Manufacturing, Vol. 19, No. 6, pp. 829-835,2018.

22、Hujun Wang, Jinghua Liu, Xu Zheng, Xiaohui Rong, Xuwei Zheng, Hongyu Peng, Zhanghua Silber-Li, Mujun Li & Liyu Liu. Three-dimensional virtual surgery models for percutaneous coronary intervention (PCI) optimization strategies. Scientific Reports, 5:10945, 2015.

23、Zhou, Jian; Li, Mujun; Hu, Yang; Shi, Tianyi; Ji, Yueliang; Shen, Lianguan. Numerical Evaluation on the Curve Deviation of the Molded Glass Lens[J]. Journal of Manufacturing Science And Engineering-Transactions Of The ASME. 136(5): 051004, 2014.

(2)     承担科研项目

1、国家自然科学基金面上项目《非接触式滚压印技术及其动态压模机理研究》(51475442),2015年—2018年,主持;

2、国家自然科学基金青年基金项目《基于同步辐射光刻的▓大深宽比微结构滚压印技术研究》(50905173),2010-2012年,主持;

3、教育部中央高校基本科研业务费青年创新基金《非球面玻璃透镜的▓精密热压成型关键技术研究》,2011年—2012年,主持。

3、中国博士后科学基金《基于同步辐射光刻的▓具有大高宽比微结构的▓滚动热压印压模加工技术研究》(20080430773)2008-2010年,主持.

4、国家自然科学基金面上项目《基于准LIGA技术的▓MEMS制造误差修正方法计算机仿真研究》 (60473133)2005-2007年,参与.

5、国家自然科学基金面上项目《加速器大功率同轴负载研制及高功率微波吸取材料特性研究》(10775128),2008-2010年,参与.

6、国家自然科学基金面上项目《多尺度精密玻璃透镜的▓热压成型技术研究》(51075381) 2011-2013年,参与.

(3)专利情况

已授权发明专利3项,另有4项发明专利已受理




Baidu
sogou
XML 地图 | Sitemap 地图